Door To Wing Seals - Are These Correct?

StefanVXR8

Member
Hey guys, I was given 4 new seals and believe them to be the ones that go on the aluminium frames between the front wing and door.

Before I drill out the rivets and remove the old ones and staples (I'm going to try and reuse them), can someone confirm the seal in the second picture is correct? If so, how do they orientate? There's a small lip on the back of these seals which isn't too clear in the photo.

Thanks

Stefan

5F89A4E1-B74D-48D9-84C3-9F0990A5CA3C_1_105_c.jpeg

854D8CC4-2E1D-4090-B181-5E099CD9D50A_1_105_c.jpeg
 
Definitely No.
Not convinced the rubber squeegee in your hand is for the door tops either. May be the angle of the pic
 
It does look similar to the exterior door to glass seal but as GRTV8 notes, it is difficult to tell because of the angle/darkness of the photo. Jon Wadham has an excellent photo of those seals on his website you can compare with. Just search for part number 364183 on the JRW site and you will see the photo showing the seal profile.
 
Last edited:
These are what you are looking for. I bought mine from Wins….very pleased with them. I think the rubber in your photo is as you say for the door to glass seal. B4D757E0-3715-4579-8E32-57A60C18DDD2.pngC865168D-34D7-468D-B462-29F87125FD46.pngC865168D-34D7-468D-B462-29F87125FD46.png
 
Last edited:
when I replaced my vertical door seals I bypassed the stapled rubber to aluminium method and used a metal/rubber glue.
They've been insitu. around ten years now and haven't parted company yet.
 
Thanks guys, I'll get some of the correct ones ordered next time I'm on Wins, which on't be long as I need some suspension parts :)

Thanks for the tip @GRTV8 Will use that method.

Stefan
 
Back
Top