Darkness and lights...

p6steve

New Member
Hi guys - just a quick question so I know in which direction to go - if indeed it is as simple as that. My side lights work fine, my dipped lights work fine and my 'flashing' lights up all four headlights, however, when I put the lights on main beam permanently pushing the stalk up, they all go out !!!
Should I be looking at the fuse box, is it a dirty connection somewhere or is it something more complicated that will need an electrician's expertise? It's a 75 V8 auto....
Cheers
Steve.
 
Steve,
sounds like a connection in the stalk switch - The same has happened to me in the past.
It is possible to see/clean the contacts
Regards, John
 
hi that is the exact fault i had not long ago. the cure was in the fuse box the fuses had bad conections so used a little bit of fine sand paper on the two pins at each end and also cleaned the bullet connectors at the back of the lights.

all the best

chris
 
Back
Top