coil springs for P3/75 1949 sedan.

[Derrick.Smith]

Looking for more free advice, i am in the process of getting some new coils made i have all the measurement data out of the p3 workshop manual. i would like some guidance on a sensible height from the ground to the bottom edge of the guard. thanks in anticipation regards Derrick.Smith

 

[roverp480]

Cannot help with the height to the guard but I see the manual (page E11) states the bottom suspension link should be 6.5mm to 8mm higher at the inner end to that at the outer . This gives the correct ride height in this condition

 

[Derrick.Smith]

Cannot help with the height to the guard but I see the manual (page E11) states the bottom suspension link should be 6.5mm to 8mm higher at the inner end to that at the outer . This gives the correct ride height in this condition

Thank you for your reply, i thought some person may have done this exercise successfully a different way.thanks again. regards Derrick.Smith.