Cilinder head

Hi everybody , little questions about etc 0216 heads from a sd1 if they are efi can you use these whit a carburateur .How do you have tho close the holes for the injectors . Can I use my rockergear from the p6 cilinder head . Or should i have the Original rockergear for this head . Thank you very mutch . Thanks tho Google translead also .
 
Hi, Yes you can use it with carbs, the injectors are in the inlet manifold and the P6b rocker gear will work with it.

Colin
 
Hi, Yes you can use it with carbs, the injectors are in the inlet manifold and the P6b rocker gear will work with it.

Colin
How stupid of me thought the holes for the injectors whore in the cilinder head . Something has to be adapted to the rocker gear ? Wood you buy new bolts for the heads .
 
Hi, No mods or adaptions to the rocker gear needed. The head bolts are not stretch bolts so will go round again.

Colin
 
The only difference with EFi heads is a small notch in the inlet tract which you can ignore. The rocker gear I believe didn't change at all during the life of the RV8.
 
Back
Top