BW65 Speedometer Cable Adaptor

GWEN1974

New Member
Hi,
I am looking at fitting a ZF 4HP22 Sherpa gearbox to my 3500 Auto. Most of the issues and "how to" are covered on other posts. I want to keep the mechanical speedometer drive of the Sherpa tail.
One idea I have is to alter a BW65 speedometer adaptor. I have access to a machine shop to achieve this. If it works, I will proceed with the ZF rebuild and installation over this coming winter.
I want to keep my existing BW65 intact as a backup so I need a spare speedometer adaptor as per the attached photo. Does anyone have one available?
Thanks
KJ
IMG_0081.JPG
 
That has been done before.

I'll try to see if I have the part you need here. I assume you want the driven gear to go with what you have pictured.
 
I have the green nylon gear drive but not the cable. I cannot find details for the Sherpa tail cable type or connection. My measurements point to needing a 90 deg angle adaptor as well to fit in the P6 tunnel. I can get the BW adaptor machined to fit the ZF so I can keep the P6 angle drive and speedo cable.
 
Back
Top