BW 35 rear clutch seal installer?

Hi All
Probably an old chestnut, but does anyone know where I can get a rear clutch piston seal installer for the Borg Warner Type 35 automatic? I got the front clutch piston in with no trouble, but the rear is a different story, despite the lead-in chamfer at the top of the bore. The piston goes down until its top surface is 30mm from the top of the clutch basket, but I calculate it should be more like 36mm down, so I think it is sticking on the seal.
Thanks in advance for any help!
 
The come up on ebay occasionally, but there are two types, and if you get the wrong one for the Rover (and other boxes with the larger clutch packs) drum you will have to modify it before you can use it.

You could ask Andy (eightofthem) on here, he may be able to sell you a resealed drum on exchange, or reseal your drum if you send it to him.
 
The come up on ebay occasionally, but there are two types, and if you get the wrong one for the Rover (and other boxes with the larger clutch packs) drum you will have to modify it before you can use it.

You could ask Andy (eightofthem) on here, he may be able to sell you a resealed drum on exchange, or reseal your drum if you send it to him.
Thanks Harvey, I will keep a look out for one. Might have a go at making my own first though.
 
Back
Top