Banjo bolt

[Bigfoot]

Need a banjo bolt and washers to go on the power steering box. Anyone know what the thread size is please or where I can get one? I can find companies online that sell them but I have no idea of the thread size

 

[Bigfoot]

I bought a 5/8" UNF bolt for £12 for 4 on amazon and drilled a 10mm hole down the center and with two 5mm holes on the side. But not easy. Did break my 10mm drill bit right at the end when it snatched. I only had a hand drill . Took my time, slow and easy with lots of oil. I wrapped PTFE tape around the bottom two holes to keep the oil in. I did have to sharpen drill bits many times.

 

[cobraboy]

That is a good result using a hand drill