Search results

Hi Folks Has Tony Buntings E-mail ben hacked ? As I am getting the occasional E-mail from him ,that has a suspisious link Best Regards Adam

I was planning to remove the sender unit first ,I don't fancy trying to solder a leaky sender unit ,lying on my back with a hot soldering iron in my hand ,and petrol leaking out !! Can you use just a normal soldering iron ? Thanks .

Good Day folks My fuel sender has developed a leak from one of the joints . How easy is it to resolder the joint ? and do I need any special tools ? Or will a soldering do the job ? Many Thanks Adam

They do just pull off ,they are a tight fit !!

Hi Folks Does anyone know how to remove the button from the side of ET headrests ? Do they just pull off ? Thanks Adam

Hi I am after some of the waist finishers that go at the end of the door window frames ,part numbers 364542/364541 & 364529/364530 ,I have had a good search ,but no one seems to make them. Thanks ,Adam

Sorry to resurrect an old thread ,but I am after the same parts ,does anyone make them now ?

It turns out it was a knackered tyre !!! Thanks for your help folks .

I will give this a try ,as the car hasn't had much use over the last few months maybe one UJ is sticking ,they have all been replaced in the last five years or so ,so they are not worn .

It turns out it isn't a tyre and doesn't seem to be related to fuelling issues ,it feels more like a propshaft balance problem .

Mystery solved ,it is all down to a miss-shaped rear tyre ,that will teach me to buy budget tyres !!

I had the regulator set at 5 PSI ,but I will check again as it has been a while since I last checked it

Hi Folks ,thanks for your help ,I will have a look at the weekend Cheers !

What would cause this ,could it be a Fuel pressure issue ? as I have a Webber 500 fitted and moved the fuel pump to the rear ,thanks Adam

Hi Harvey It is a 1972 3500 converted to 5spd manual ,it feels like the issue is coming from the rear ,not the front of the car ,it is difficult to explain ,I had the UV joints replaced a few years ago ,so I am wondering if it is a balance issue with the propshaft .

This is an odd one ,but I will describe what my car is doing When I pull away ,it feels like the car is hesitant ,but once it is up to speed it is fine ,but below 30 it seems intermittent,almost like the power is coming on and off ,it feels like it is something to do with the propshaft . If I...

I have read somewhere that the top ball joint is adjustable ,is this the case ? Many thanks Adam

Hi Colin ,yes that is the part I am having problems with ,no matter how a fiddle it it doesn't quite want to fit ,I will try your method Cheers Adam

Hi All I have started to fit the new carpet set ,but I am having difficulty getting the sill pieces to fit nicely has any one else had this problem ?

Thanks mate !

Hi all ,I have recently bought a new carpet set ,and I was wondering what the best adhesive was . What have you all been using ?

What size are the unions ? Does any know ? I am guessing that they are BSP threads .

Hi Harvey ,do you know where I can get a replacement ? As I suspect my union is damaged ,as it is leaking .

Hi Does anyone know the size of the fuel pipe union on the top of the reserve tap ? I am after the 90 degree one which connects to the nylon fuel hose ,also does anyone know where I can get one . Thanks Adam

Hi Clive Do you have any interior bits? I am after some front seats Adam