Search results

Hi, We'd very much like to follow the front spring configuration that Alex has shown in this project thread, see pic attached. To ease this process we'd like a pair of spring cups to cut, just as Alex did. Anyone got a pair they can part with? Thanks, Tim

Hi, We're finally getting our finger out and gathering up the bits needed to convert our P38 Rangerover 4.6 ready to be installed in our Historic Road Rally car. We'd rather not strip too much off our good running 3.5, we have a doner SD1 engine which will give up a lot of the bits needed but...

Hi, We're giving our Histroic Road Rally car a bit of a much needed makeover and could do with a better driverside cover sill, the one on the car has took a knock a few years back and although solid enought it's not terribly straight. The rest of the car is coming together nicely so we'd like...

Hi, Our poor Road Rally car is beginning to look rather down at heal, in our ownership she's never been a show stopper but looking back at the "as pulled from the chicken shed" pics of some 5 years ago it's clear the poor thing has got a lot worse. I've been driving her as my daily now for a...

Hi All, Looks like Gavin and I will be making the pilgrimage over to the P6 Club national rally on the 29/30th June and we look forward to putting some faces to names. As you know our car has recently gone through rather an extensive modification at the back end, it now sports a Jag IRS...

Hi All, We are putting together another engine for our P6 Historic road rally car and would like to gather up various P6 specific bits so as to avoid stripping the current engine too much, it runs very well and if possible we’d like to keep it as a ready spare. We Need: Sump Windage Tray Oil...

Hi, I'm in need of a Diff support plate for our Historic Road Rally car, something solid to get us back on the road quickly while a stronger one is fabricated. Can anyone help us out? Thanks Tim

Hi All, I'm in need of a replacement driverside sill for my P6 Historic Road Rally. I'm not looking for something mint here just straight and reasonable solid would be fine, current one is a little bent :( I can only find NOS ones available through the usual suppliers and it would be a terrible...

Hi All, I’m look for a couple of items to help us further develop or Historic road rally car. I need a pair (or even a single odd one?) of rear brake callipers, ideally something needing rebuilt as we are going to pull them apart anyway!!! Also could do with a completely bare steering...

Hi, I looking for a wiper motor for a 74 P6V8, condition of the actual motor doesn't really mater but the park switch must work, mine runs very well but doesn't park!!! It seems there is something wrong with the parking switch on the motor. For ease of postage even a switch removed would be...

Hi, I've got my Historic Road Rally P6 3500 V8 nearly ready for it's first event but I'm just struggling a little with some of the last few jobs. I've got the wipers working, well sort off, they run at both speeds but do not self park unless I turn the switch to the intermittent setting then...

Hi, My historic road rally P6 is beginning to come together and thoughts are moving forward to preparing for competition. I really could do with a second set of 5 Wheels for the car, anybody got any spare? I'm going to need help here as I live way up in the top left corner of N.Ireland so it...

Hi, I foolishly stripped the brakes off the diff of my project P6 historic rally car without taking any pictures of how the hydraulic pipes all connect up!! Would anyone have a picture showing where they all go? It would be hugely appreciated. Thanks Tim

Hi, Wonder could someone do me a favour and e-mail me some pictures of the clutch master cylinder set-up from a V8 car. I’m converting an Auto to SD1 5sp manual and I’ve most of the conversion done, i.e. gearbox in, rear mount sorted etc…. I’ve even got the pedal box in but I’m struggling to...

Hi, I’d like to convert my Historic Rally car to a true dual circuit system but this is proving to be harder than I’d thought. I was thinking of fitting a balance bar pedal box with the cylinders point into the cab rather than through the bulk head. However on checking the rules for the sort of...

Hi, Just thought I’d quickly post a picture of project Historic Rally car. The car is way better than I thought it would be, I’ve all 4 wings and sell covers off now and although it’s seen some repairs over the years it is not going to be a weld-athon to get it together. The car was last on...

Hi, I’ve had a look through the various posts in this section and despite all the excellent info. contained within I’m still left with some questions. :shock: I’ve introduced myself and given a short overview of my intentions within the Welcome section but to summarise I’m trying to build a...

Hi, Thought I’d take a moment and introduce myself, only seems fair as I’m anticipating asking a lot of questions over the coming months :) I’ve recently acquired a rather sad but relatively solid P6V8 Auto as a basis for building a Historic Rally car, not for the more high profile stage rally...