Has anyone ever found an alternative gearbox option for the 4cyl cars?
Mine will need a rebuild and I’m just wondering if a swap might be a less expensive option as there aren’t a lot of P6’s in BC and shipping costs really start to add up
The upper and lower ball joints we replaced last year,when I got the car back on the road I noticed there was more negative camber than before they were replaced,what would cause that?the workshop manual doesn't mention getting an alignment
I recently replaced the upper and lower ball joints on my 72 P6
I took the car on a 1000 mile trip last month,I am planning on another trip so I pulled the wheels to have a look and I noticed that both front wheels had inner wear down to the steel belts.
Does replacing the ball joints affect the...
Many Thanks Steven,very sorry to hear about your wife,keep a positive outlook and things will seem a little easier,BTW my eldest daughter was diagnosed with Leukemia when she was 8,she's now 35 and has 4 kids,so good things do happen.
I spaced the fusebox about a 1/2 inch from the firewall so I could route the bottom wires behind,looks neater but I also had to trim about an inch of the rear of the glove box to clear the wires,all in all a relatively easy job,the flag connectors worked well!
Out with the old and in with the new!
Not a bad job really,just make sure you label the wires correctly,also working of my scissor lift I didn't have to be on my knees and twisting my back.
Next job,relays for the headlights,and ball joints
I am looking for the,"The rod-to-cable 'see-saw' throttle adapter from the 2200 TC setup.
I am swapping out my HS8 for Hif6 but being in BC Canada they aren't available over here.
Can anyone help?
I'm John Walkden from Langley,BC Canada.
I have a1972 P6 that was originally from Hong Kong.
I purchased the car in 1999 an restored it 4 months later.
I finally got fed up with driving a right hand drive car here in BC,so I converted it to LHD in 2008,now my wife doesn''t scream every...