Search results

  1. K

    Webasto and head lining

    Thanks for the reply, when did book yours in? Just wondering what the time scales might be??
  2. K

    Webasto and head lining

    Hi thanks for the reply I think it was him that restored the actual roof itself and think he retired from south London and now just sales spares. But will look into it thanks
  3. K

    Webasto and head lining

    Hi All Long shot I know, but after 24 long years my 2000 TC is now road legal all that needs doing now is my fully restored Webasto sun roof needs to be installed along with the headlining. I'm currently on chemotherapy which has complacated the problem as you can imagine. So I'm looking for...
  4. K

    Head & fog light switch

    Think the help has cracked it will double check tomorrow thanks for all the helpful comments. hopefully it's the right switch!
  5. K

    Head & fog light switch

    Hi hopefully I've loaded two photos there are four connections two red and yellow wires one blue and one red and blue. I'll try what you suggest thanks again for help.
  6. K

    Head & fog light switch

    Thanks for reply no such thing as a silly question! As far as I know lamps are ok but car has been off the road 24 years I'm just not sure the switch is wired correctly or working correctly will check lamps later .....
  7. K

    Head & fog light switch

    Hi all just a quick question. I not sure of the correct wiring connections for the headlight switch for my 1967 2000tc. I seem to have either no headlights on or all four lights on. Sidelights seem to work ok as normal. including the four connections the switch is numbered 1 to 8 as per diagram...
  8. K

    Boot seal

    Hi there is lip but it still doesn't seem to only just sit on top, it doesn't over the metalwork....
  9. K

    Boot seal

    Hi all just a quick question, I'm trying to do it the boot seal to the edge of boot (the monoc not the lid itself) and it appears to be too small does anyone know whether it just sit on the frame or should it overlap which would make it a lot easier to fit!! Cheers Kevin
  10. K

    headlight switch

    Hi Colin sorry should have said it's a series one 1967 and it's the switch on the dash
  11. K

    headlight switch

    Hi All Just a quick question having more problems with my headlights, no matter how I wire the switch can't seem to get my head lights on, they appear to come on when I move the switch up to the top setting which I assume is for fog lights but the bottom position doesn't have any affect. I was...
  12. K

    strip speedo wiring

    Not quite sure what you mean by tell tale??
  13. K

    strip speedo wiring

    Just an update after spend way too many hours trying to sort this out I took the advise [thanks Colin] and brought another flasher unit, my third and surprise surprise it worked, well briefly so brought another one and so far that seems to work. It's a two point one so it L and X which is the...
  14. K

    Indicators not working

    Hi the power to the stalk is 12v from the purple wire. cheers
  15. K

    strip speedo wiring

    Hi Colin thanks for getting back to me so quickly, in a round about way I think I've done what you have gone through but will follow your advice step by step the only green purple wire appeared to light up the full beam on the dash when it did work will let you know what happens next.
  16. K

    strip speedo wiring

    Hi All I'm still having issues with the indicators, now can't get them to work at all! I tried to wire in a hazard unit which worked briefly but I think it burnt out the flasher unit as it go very hot, so replaced it for a like for like unit and now nothing fuse ok and pretty sure all earthed...
  17. K

    Indicators not working

    Hi All I'm still having issues with the indicators, now can't get them to work at all. I tried to wire in a hazard unit which worked briefly but I think it burnt out the flasher unit as it go very hot, so replaced it for a like for like unit and now nothing fuse ok and pretty sure all earthed...
  18. K

    Indicators not working

    Hi All I'm still having issues with the indicators, now can't get them to work at all. I tried to wire in a hazard unit which worked briefly but I think it burnt out the flasher unit as it go very hot, so replaced it for a like for like unit and now nothing fuse ok and pretty sure all earthed...
  19. K

    strip speedo wiring

    Thanks Colin it's a series 1 it only has one one flasher unit as far as I can tell. I unplugged the connectors from the handbrake and the beam indicator stops flashing! I'm going to get a hazard unit from eBay and hopefully it will include the standard flasher unit I've got the standard wiring...
  20. K

    strip speedo wiring

    Hi Colin yes bulbs connect short of dis-connecting it all and starting again it's driving me mad! did get it to work briefly but must be a #n earth issue, but they all seem to be earthed I earthed each flasher separately and it seem to work as soon as I put both to earth the flasher worked...
  21. K

    strip speedo wiring

    Thanks I've earthed both of the indicators and when you indicate right its fine, but when you indicate left they both flash, I've got a double earththat looks like it goes to the back of the strip but when I attach that the centre beam indactor takes of flashers and blinks , must be an earth...
  22. K

    strip speedo wiring

    cheers Colin would that be the double earth that is with indicator relay??
  23. K

    strip speedo wiring

    Ho I have series one P6 with the strip speedo, I'm having problems with the indicators they work but I get either both flashing on the dash or three with the full beam on as well! I was wondering if anyone knows the correct sequence of the wiring at the back of the strip speedo so far the only I...
  24. K

    Conversation to inertia seat belts.

    Hi Colin Thanks for this but the main reel attached the new ones needs three anchor points don't think I can use the bottom one twice, or can I....??
  25. K

    Britax static seat belts

    Hi All I've decided to swap my Britax seat belts for a pair of inertia seats belts so have a #the static ones up on ebay if anyone is interested regards Kevin P6 Rover Britax static seat belts
Top