Search results

  1. W

    rover p6 spares

    Hi again, Keith here, Although I live in Montrose I work in Renfrew, I would like to come and see what you have although I would be struggling to find transport to take it all by the sounds of it, Best regards Keith.
  2. W

    side trims

    On this thread, My Rover came with pinstripes on, I thought about fitting metal trim but I've grown to like it as it is now, And no holes to get rusty, Keith.
  3. W

    Rear Door seals

    Thanks very much guys very helpful As usual, Much appreciated,
  4. W

    Rear Door seals

    Hello All Again, Seeking advice, On removing the rubber rear door shut seals I've discovered that the small channel section that fits along the rear bottom edge is totally shot and I need to replace this small 'S' shaped section each side, Is this obtainable or will I have to try to fabricate...
  5. W

    Steering

    Hi thanks for the reply, could you pm me please?. Keith.
  6. W

    Steering

    Hi all, Power steering parts required if possible in order to convert my very heavy 3500s, Fingers crossed, Regards Keith
  7. W

    rover p6 spares

    Hi there, How did you go on selling your spares?, I just noticed your ad, Keith. :idea: :roll:
  8. W

    speedo drive

    Yes thats the very fella, sits into the gearbox held in by a retaining clip, I take it theres some kind of oil seal too then cable connects to it, I have cables by the way, Thanks again, Keith.
  9. W

    speedo drive

    Thank for that info, And thank you Gareth that would be great, If you come across one I can be contacted on 07917344330 or kwall8448@aol.com many thanks again, Keith.
  10. W

    speedo drive

    Hi and thanks for the reply, I've included a pic to try and find out exactly whats missing, I'm glad the boxes are all the same but I still need to source the part and Rimmers are out of stock, Cheers, Keith.
  11. W

    speedo drive

    Hi all I need help sourcing a speedo drive for my 5 speed conversion, It was done before my time and has never worked, When I finally got round to investigating it seems that there are bits missing down there, it has an orange drive with 20 teeth but its damaged at the other end and has no oil...
  12. W

    LT77 Gearbox Question

    On the subject of SD1 gearboxes my P6 has one fitted and the speedo drive at the gearbox end has been botched and stripped, I'm now looking for a drive pinion / transducer orange with 20 teeth to get me through the MOT and on the road again, Any help would be greatly appreciated, Thanks :roll:
  13. W

    spark plug comparisons

    Thanks for that Harvey, Not having a Champion L92Y I didnt know the thread length, guess I will be buying a set, Anyone want a set of long reach?, Keith.
  14. W

    spark plug comparisons

    Hello all, I know that Champion L92Y is the recommended plug for V8s but mine was fitted with Bosch W6BC ones as i discovered when changing them, I have a set of Bosch W7DC that I bought supposedly for the Rover V8, But they are longer than the W6BC fitted, I'm scared in case I damage the...
  15. W

    Steering wheel on ebay

    Hi all, Further to my item in the steering section, I bought one of the mountney wheels and bosses shown, Looked lovely but the boss splines were different to my 3500s ones, To their credit BBCLASSICCARS gave me a total refund, Regards, Keith.
  16. W

    Boses

    I now know what chrisyork meant when he said that he had a centre boss specifically for the P6 that wouldnt fit, The Mountney one that I bought wont fit either and it clearly states on the box for Rover 2000-3500 up to 76, great pity now I will have to bodge it or something.
  17. W

    Boses

    Re: Bosses Hi again, As a further to my last posting I managed to find a nice Mountney wheel with 3 alloy spokes on ebay, it has a boss to fit the p6, And I have a 3500s centre badge which sets it all off nicely, Regards, Keith.
  18. W

    Badge

    Your doing very well Richard I'm intrigued, Keep it up and good luck I'm watching intently, Regards, Keith.
  19. W

    Rear Screen Seal Trim

    Thats great thanks, Keith.,
  20. W

    Another paint colour question

    Hi all, Thats typical of my luck, I now have 3 codes for Almond, Ruediger-Wicke quotes 170, Colin has GN-37, and Halfords came up with 161, My 1973 P6 needs touch up soon, Keith.
  21. W

    Boses

    Re: Bosses Thanks Chris, My 3500S came with a nice original rover bakelite 15inch wheel unfortunately its not the correct one and now I have to either find a proper one or a nice alternative, Why cant folk leave things alone Grrrr, Anyone have a wheel or a suitable Boss?. Rgards, Keith.
  22. W

    Boses

    Hi again to all, Can anyone tell me if there are any mountney steering wheel bosses that would fit our cars from land / range rover series?, Or is the spline size spcific to Rovers.
  23. W

    Rear Screen Seal Trim

    Hi John, I just read your bits about screen seals, Can I ask where you got them?, Regards, Keith.
  24. W

    Rover History

    Thanks Dave, Now you mention it I seem to remember doing something like that with one of my Triumphs years ago and got photocopies and details of former owners,
  25. W

    Rover History

    Hello All, I'm looking for possible information about my Rover P6 3500S, Its Almond in colour registration PPV 61M but that was changed from registration WHE 536 only this year, Its a nice looking car but I think its had new panels over the years, It began life in Sheffield and then MOTs turn up...
Top