Search results

  1. gripper

    rear screen relay

    thats a fuse in my book
  2. gripper

    rear screen relay

    but mgbd parts sell this relay
  3. gripper

    rear screen relay

    you are right, 85 hrw switch and 86 heater motor.
  4. gripper

    rear screen relay

    thanks harvey. i might as well get in touch with you direct.;););) you know all my answers.:thumb:thanks mate. there the only 2 things not working on my car now screen and reverse lights. switch ok on rev lights and switch for screen lights up so is live.
  5. gripper

    rear screen relay

    hi all. having the recent problem with starting which is now solved after it being the relay. i have been told that the reverse lights run from a relay as well, also heated screen dont work. is it by chance that they run off the same relay. if thats the case then where are the relays fitted. thanks.
  6. gripper

    starter solenoid

    after all the problems and checking things over as to why my car would not start quite regular it turned out to be something simple. wire to starter relay from ignition switch was corroded and not connecting properly. cheap fix for a change. thanks for all your help people.
  7. gripper

    starter solenoid

    hi harvey, you say the starter relay is on the driver side under bonnet, yes there is one there so what is the one in the passenger side glove box. my car was an auto changed to man somewhere along the line so it would have had an inhibitor switch. would that relay have something to do with...
  8. gripper

    starter solenoid

  9. gripper

    starter solenoid

    is there anything you can do to the solenoid. every now and again car has no response. turn key can hear relay click but nothing but then all of a sudden it will turn over. red lights dont dim when this happens.
  10. gripper

    starter solenoid

    thanks harvey, i will get mine off when the weather permits me to. should there be a number on the starter.
  11. gripper

    starter solenoid

    hi, can someone tell me the part number for solenoid on starter motor on 72 v8. ....must get a parts manual.
  12. gripper

    starter relay

    anyone got the part number handy for the starter relay on 3500 p6
  13. gripper

    baffle plate

    i have a baffle plate missing from my v8 rocker shaft. anyone got one.
  14. gripper

    Front Spoilers for P6?

    so where do we get these spoilers from.
  15. gripper

    bottom end.

    just to let you know that i sorted the above problem. i put in some wynns hydraulic lifter treatment and run the car for about 260 miles and the noise disappeared i then drained the oil and replaced with oil with recommended zddp and a tin of wynns oil treatment. car runs superb with no noise or...
  16. gripper

    dash top

    hi, has anyone repaired their cracked dash top successfully, if so what have you used.
  17. gripper

    screen trim

    is the trim across the top of the windscreen just held in by the corner bits that are rivited.
  18. gripper

    exhaust

    had a pipe made to take the place of the centre box. well recommended, sounds superb but not too loud. at least you know its a v8 now.;)
  19. gripper

    leak

    does anyone know the part number for the bellhousing you need to fit lt77 box to p6 v8 so i know what im looking for please.
  20. gripper

    rear screen heater.

    hi all, my rear screen heater dont work. switch on the dash lights up. can you tell me where the wires are that go to the screen at the back of the car so i can test if i have a live there..thanks.
  21. gripper

    bottom end.

    thanks harveyp6
  22. gripper

    bottom end.

    after a few people looking at my car we have decided what i thought in the first place and believe i have a sticky or dry lifter. only when engine hot.i think its 1 at the rear so maybe oil starvation.??? how easy are these to take out and inspect and will they come out from the top. thanks. im...
  23. gripper

    bottom end.

    i have a problem with my car. started from cold oil pressure is about 40 running 30 idle, no engine noise. when at running temp pressure just 25 idle 15 or 10 . no red warning light ever come on. but the last few days when it reaches temp i get what sounds like a tappet noise but is more...
  24. gripper

    bottom end.

    can the sump be removed in situ and the bearings replaced.
  25. gripper

    exhaust manifold.

    can a cast exhaust manifold be welded and if not, does anyone have a passenger side r/h drive one for sale.thanks.
Top