Search results

  1. Petebeef

    Revitalised Wiper Delay

    Cheers for that,i'll put it back together and see how we go!
  2. Petebeef

    Revitalised Wiper Delay

    Codekiddie in particular! ...i've recently taken my wiper motor apart to fit a new park switch..i've forgotten which position the drive/worm wheel was in..is there a particular position it should be in at rest! Cheers, Pete.
  3. Petebeef

    Auto gearshift

    Thanks,Harvey..i'll cut something to the correct length and see how we go!
  4. Petebeef

    Auto gearshift

    Tell me i'm not going mad,please..the shifting in our P6B BW65 has been getting 'difficult'..took the knob etc off..the control rod,which i would have thought would be steel is a plastic pipe(and too short),can't be right,surely it flexes under load/pressure?
  5. Petebeef

    Heater motor wiring

    Sorry Richard,i didn't realise you had replied!yes,somebody had the heater wires trapped behind the heater and going to the loom,instead of through the bulkhead,and the lever wires and earth were disconnected under the radio,think i've sorted it now!..weather has stopped play,but i'm going out...
  6. Petebeef

    Heater motor wiring

    Hi all,just removed the heater box on our '74 V8,a hell of a mess,but,refurbed a new one to go in..the question; the wires from the fan motor were trapped between the heater and bulkhead,and entering the loom under the brake fluid reservoir?the wires from the heater controls are just sitting...
  7. Petebeef

    The Infamous Series 2 Fusebox

    Ha,cheers Stan,all good,Pete
  8. Petebeef

    The Infamous Series 2 Fusebox

    Hi Stan,doing the blade conversion today..can you tell me,were your fuse value conversions satisfactory? Cheers,Pete (see you on facebook,lol)
  9. Petebeef

    Check cold dipstick BW65

    Thanks Harvey! :)
  10. Petebeef

    Check cold dipstick BW65

    Hello,sure this has been covered,but this blasted 'check cold' dipstick,how is it used?..i'm a bit confused!..TIA.
  11. Petebeef

    Fuel & Temperature Gauges - Series 2

    I got mine new old stock from Geoff at Wins..silly money,about £40 something,pretty sure he's got loads!..fuel/temp gauge,that is!
  12. Petebeef

    Fuel & Temperature Gauges - Series 2

    Hi does anyone know where the pcb is earthed?o_OCheers!
  13. Petebeef

    New member, greetings from Sussex

    Hi Andy,nice work! we're not far from you in Crawley,our series 2 V8 used to be zircon blue,before a previous owner painted it black!
  14. Petebeef

    £200 - for an ashtray??

    Just bought a brand new front one in box at Ardingly autojumble....£10!
  15. Petebeef

    GAN 340J 1971 series 2 V8

    Excellent stuff,Mark i'm doing some of it soon,probably over xmas break..some nice references there,cheers!
  16. Petebeef

    Fuel tank breather - Fuel tank breather

    Not sure if mine are right either..to open an old thread,any ideas anyone?..i think the coiled up one from the roof goes on the outlet nearest the filler cap..but which one of the other two goes to the other outlet,is one plugged,like it seems to be in the manual(quite vague!)
  17. Petebeef

    P6 Handbrake Problem

    No,its above the caliper,and everything seems to work just fine!
  18. Petebeef

    P6 Handbrake Problem

    I've just replaced the rear calipers on our V8..good old Ebay..somebody previously had put a 'tail' on the bleed nipple,which makes it much more accessible..good idea,or not?
  19. Petebeef

    Hello - I'm a new P6 owner!

    Beautiful car!..looks like you got a good one! :-)
Top