sdibbers's latest activity

  • sdibbers
    sdibbers replied to the thread Engine wont rev above 3000rpm.
    That's good, the cam timing is spot on? Also, did you perform a leak down test on the cylinders with variable compression? That can tell...
  • sdibbers
    sdibbers replied to the thread Engine wont rev above 3000rpm.
    I would suspect camshaft wear with those symptoms. A classic problem with the Rover V8.
  • sdibbers
    Although you have identified fuel system problems I’d be tempted to just check you’re getting a spark too. Just to be sure. On the...
  • sdibbers
    The pistons are aluminium, so quite soft, so bear that in mind. Protect them with cardboard or fabric when using the vice. I would hold...
  • sdibbers
    I'm afraid that is the screw you need to remove. Maybe try warming the whole assembly in the oven. Clamp the piston by its base in a...
  • sdibbers
    sdibbers reacted to mrtask's post in the thread Engine wont rev above 3000rpm with Like Like.
    Apologies in advance if it this already been suggested, but I admit that I haven't actually read this whole thread. I'd just like to...
  • sdibbers
    sdibbers replied to the thread Finally a tidy 3500S!.
    I must admit I just gave up on the puller and turned it off on the lathe. Getting back on the road
  • sdibbers
    sdibbers replied to the thread Finally a tidy 3500S!.
    Now I feel like an arse! Sorry!
  • sdibbers
    sdibbers replied to the thread Finally a tidy 3500S!.
    Just to be clear are you referring to the collars on the diff output shafts? JRW sell them new. Or you can get a local machine shop to...
  • sdibbers
    Other plus is it insulates against heat too. A real plus in the summer.
  • sdibbers
    I used 12mm sound insulating foam with high mass vinyl to deaden sound and vibration. It made a real difference to noise and fatigue on...
  • sdibbers
    sdibbers replied to the thread Tech autos carpet set.
    I’ve used tech auto for my carpet set. Came out beautifully. Just take your time when fitting. Here’s the passenger footwell without the...
    • 1710453961158.jpeg
  • sdibbers
    sdibbers reacted to harveyp6's post in the thread Diff carrier bushes with Like Like.
    But that won't do anything to stop the diff plate dropping down, all it might do is stop the bolt going through the screen of the bloke...
  • sdibbers
    sdibbers replied to the thread Heater Box seals.
    Looks ‘shop bought’!
  • sdibbers
    sdibbers replied to the thread Electric Fans.
    I’ve found the same thing. It was at idle on hot days that the float chambers on my 2000tc would boil, never had an issue with the...
Back
Top