Recent content by Pjim6

  1. Pjim6

    leds in dash indicators problem.

    I fitted LED bulbs in the Indicators and experienced all sorts of odd problems till I fitted an electronic flasher unit to the flashers and the hazards , problem solved !
  2. Pjim6

    QH part number.

    Hi Quattro, I do appreciate the points you are making . I have no problem at all with Geoff’s associated costs or with the fact he has to make a profit and yes I agree we do need good people like Geoff and Mark Gray to keep our hobby going . I have done lots of business with both of them and...
  3. Pjim6

    QH part number.

    Thank you Quattro, Yes Winns have them and I have no doubt they are fit for purpose but at £80 each , I want 2 that’s £160 for 2 ball joints . Am I wrong in thinking that is a bit excessive ?
  4. Pjim6

    Play in Top ball joint

    Should there be any play in the top ball joints ( p6. 72 ,2000tc ) with the body supported and the suspension hanging free . With the wheel off I can get hold of the upright and move it up and down. Is this right ? Thanks in advance
  5. Pjim6

    QH part number.

    Thanks sdibbers , they are on holiday until the 12 th , I will speak to mark then .
  6. Pjim6

    QH part number.

    Thank you sdibbers , Mark Gray would always be my first port of call but as you say he is out of stock .
  7. Pjim6

    QH part number.

    Colin , Thank you very much for your reply . You are definitely a better googler than I . I am looking for 2 and I thought I had found them in some old stock but no such luck . Two of our suppliers have them but at approximately £80 each ( including postage and vat ) I think is a bit steep ...
  8. Pjim6

    QH part number.

    Can anybody please tell me the Quinton Hazell part number for the top and bottom ball joints on a 1972 p6 2000 . The Rover number for the top ball joint is 595724. The bottom ball joint is 595725 . I have come across some new Quinton Hazell old stock but have no catalogue, Thank you in advance.
  9. Pjim6

    Instruments playing up .

    Sorted !! Changed old fuse box for a blade type box. £6 + 2 hours labour and all my gremlins that I have fought for the past year have vanished. Every thing works as it should . I discovered the lights have been put on a separate fuse holder with 3 Relays that’s why there is only 8 wires going...
  10. Pjim6

    Instruments,flashers and stop lights not working!

    Problem sorted ! It was the good old fuse box . I Will be changing it for a blade fuse type one next week .
  11. Pjim6

    Instruments playing up .

    Cheers Harvey I will search that out. That is the way I am intending to go .
  12. Pjim6

    Instruments playing up .

    Problem solved. . After many hours of one step forward and two steps back I finally tracked down the cause of all my intermittent electrical problems . It’s the fuse box . I replaced all the fuses with the right size ,made sure everything was clean and still had problems. I undid the fuse box...
  13. Pjim6

    Instruments,flashers and stop lights not working!

    Thank you for your reply, I have checked all the fuses and they are all OK . Ignition lights and main lights work fine but indicators ,stop lights and dash instruments are not working , help !!
  14. Pjim6

    Instruments,flashers and stop lights not working!

    If my Voltage regulator is faulty would that cause the flashers and the stop lights to stop working as well ? Thank you
  15. Pjim6

    Instruments playing up .

    Hi , The Blue Light works when the instruments or the flashers are not . What does that tell you ?
Top