Recent content by Only1p6

Thanks Colin, that is a very helpful link. Hadnt come across that thread so I appreciate you pointing me in its direction, Atb Rod

Hi Ron, thanks for your reply, looking forward to hear what Harvey might be able to advise. I see you sign off as 4.6, id be interested to haer what mods you did to achieve an extra 1100cc, is it a modern 4.6hse, any issues fitting etc? Cheers Rod

Well i've seen articles on replacing a stock 3500s gearbox with a '77 or converting an auto 3500 to manual but cannot find much on what could be put in an automatic 3500 P6 in the way of a more modern & fuel efficient auto box. Can you drop a sd1 auto in an automatic 3500 P6? Whats been done by...

Peter, thanks for the suggestions. Spray adhesive seems to be what's used professionally on all sorts of trim materials / fabrics so that's probably the way to go. Also found water based contact adhesive too, a possible alternative? Should be safe on foam which concerns me a bit compared to...

A combination of age, warm weather, degrading foam cushioning & less than generous wrap round seems to add up to the fabric comming away from the foam on the front door cards. I wondered what others may have used to sucesfully stick the fabric back in place. Since the fabrics quite thin i'm...

Thanks for the welcome, just starting to have a look through past posts, lots of info on here.

Well i've just joined the forum too. Don't have a P6 at the moment but will be looking in earnest soon. We used to have one a while ago which is the reason i'm keen on trying to get one again. I wondered if the old one is still about or if its been scrapped or sitting on bricks somewhere? If I...