Recent content by chris varming

  1. C

    automatic transmission BW 65 new gasket

    Thanks Harvey for your quick answer! Regards, Chris Varming++
  2. C

    automatic transmission BW 65 new gasket

    I have just received a new cork gasket for the undertray for my gearbox. Question: do I just fit it - or do I use sealant? thanks, Chris Varming
  3. C

    Water leak from engine Block

    Thanks all for your quick respond to my problem - I'll see if the cores are available here in DK. Regards, Chris Varming
  4. C

    Water leak from engine Block

    Gentlemen, I have discovered a serious leak from the capsule? on the engine Block on my P6 V-8 and wonder how to solve this. I have no name for the circular capsule (one of three on the right side) but it is clearly seen on the repair operation manual for P6 (page 12.21.46 sheet 3) question: is...
  5. C

    New member from Denmark

    hello Michael, have you examined your fusebox closely? - I had the same problem with sudden power drop, - turned out to be the fusebox which had melted between two fuses.
  6. C

    The Infamous Series 2 Fusebox

    I know the toppic is a few years old! But thanks anyway to you Vaultsman for such a precise description of how to deal with the fusebox.. I've just done exactly as you have prescribed and no smoke behind the glovebox ever since!
  7. C

    combined ignition/lock switch repair?

    This was just what I needed!!! - thanks to you Rovering Member - just one question: where do I in 2015 get a new rubber cover for the switch? Chris+++
  8. C

    Cobined ignition/lock switch repair?

    Postby chris varming on Mon Sep 14, 2015 3:26 pm (I have posted this under "-suspension/stearing" - may be it should be under this section "Electrics"...) Gentlemen, I wonder if any of you have ever dismantled the combined ignition/lock switch? (27 in fig. 11.37 Power steering linkage) - is it...
  9. C

    combined ignition/lock switch repair?

    Gentlemen, I wonder if any of you have ever dismantled the combined ignition/lock switch? (27 in fig. 11.37 Power steering linkage) - is it possible or is this switch awailable as new? - I have dismantled mine and cleaned it as it was very dirty with some corrosion, do I grease it with cobber...
  10. C

    BW converters

    Thanks for the info Harvey! Chris Varming
  11. C

    BW converters

    Harvey Quote: The thing to watch out for is that you make sure it's not a BW66 converter, as that will fit, but won't work Harvey, how can I find out the difference between a BW66 converter from the BW65 - I have 6 converters and one of them is from a BW66 but they look alike? it will be a...
  12. C

    speedometer drive gear

    Thanks for your reply - I'll go for the option to have the P6 drive gear machined to fit on the shaft of the SD1 BW and I'm ashamed to confess that the "someone" who forgot to change the speedo drive gear 2 years ago - was in fact me... :oops: regards, Chris Varming
  13. C

    speedometer drive gear

    Gentlemen, I have problems with my speedometer, that does not work. I have rebuilt a P6 over the last two years. The other day I had my first drive in it and everything went as expected. However, the speedometer did not work at all. I then changed speedometer, and cable and angle drive but...
  14. C

    speedo cable

    Thanks Pilkie that was just what I wanted to know. Q:Is it possible to put the angle on the automatic transmission without loosening it from the propeller shaft I wonder?? Chris
  15. C

    speedo cable

    7.5 mm is the diameter of the speedo cable. While we are at this subject: the cable is connected to the speedometer at one end and to the BW 65 at the other end. Focusing on the gearbox end, there is a 90 degree gadget. What is the purpose of this?? Is it a sort of converting unit or is it to...
Back
Top