The Rovering Member
Well-Known Member
Don't know if this helps but i fitted these to my 2200TC recently. I bought from this seller:-
http://www.ebay.co.uk/itm/Engine-Mount- ... 832wt_1379
Parts where FEBI-BILSTEIN brand which are, I am informed by a mate into VW's, a VW OEM. VW Part number is 191199381 / 191199381A use this number in any ebay/google search.
If you look at the photo the mount has a washer which is held in place by two spreader 'ears',. When I compared the new mounts with the old there was about 5mm height difference; the new mounts would have the engine sit 5mm lower. I filed the ears flush with the washer and turned up some 5mm spacers ( though you could use washers ) to get the engine to sit at the same height as before to avoid any problems.
Had no problems and a good result, made a big difference. A big thanks to Demetris!
Pat
I'm looking to replace Bruiser's engine mounts while the manifolds are off the car. Obviously the Demetris-discovered VW items are the ones to go for. The link above is still current so just need confirmation that these are the ones l should be ordering.