jp928
Well-Known Member
I have an SD1 dizzy etc as in below pic. I have a plan to get the dizzy to fit and pick up the P6B oil pump drive. In exploring if anything else is needed I have some questions. Of the two leads that come out of the separate module, one has a black trace - Coil negative? Other lead - coil positive? The module has a Lucas no 90428B on a white plastic face, lsited as an amplfier. Is this an ignitor?
Oddities - the SD1 manual lists coils for the 4 and 6 cyliner engines (GCL130), but not the V8 models. These list only ignition modules - 32 c5 12 for the Vitesse, 22c 12 for the std engine.
Am I on the right track here? Can I test it off the car with a coil and a 12v source by spinning the dizzy by hand? Are other ignitors like the Bosch BIM024 or any of the many US ignitors relevant to this dizzy?
Oddities - the SD1 manual lists coils for the 4 and 6 cyliner engines (GCL130), but not the V8 models. These list only ignition modules - 32 c5 12 for the Vitesse, 22c 12 for the std engine.
Am I on the right track here? Can I test it off the car with a coil and a 12v source by spinning the dizzy by hand? Are other ignitors like the Bosch BIM024 or any of the many US ignitors relevant to this dizzy?